1/30/2024 0 Comments Linux webmin![]() ![]() Webmin is accessible from any network computer by replacing the localhost with the IP address of the system on which it is being accessed. To access Webmin, open any web browser and type followed by localhost and the port 10000. Any ideas on what could be causing this? How Do I Connect To Webmin? I’ve checked to make sure that the webmin service is running and that the firewall is allowing traffic on the webmin port, but I’m still having trouble connecting. You can also use rpmws -e webmin if you have an RPM version of Webmin, or if you’ve installed the Solaris package, you can use rmpkgwebmin if you have an RPM version of Webmin.Ĭredit: I’m trying to connect to webmin on my server, but I’m getting a “connection refused” error. How do I uninstall webmin? Run the command /etc/webmin/uninstall.sh to turn on the webmin program. It is now possible to access the Webmin interface via a custom URL, such as or (if your system’s IP address is 192.168.1.5 and 192.168.1.6). Webmin can listen for connections in ports 1001 using this command. The following instructions will guide you through the process of changing the port: open /etc/webmin/nf and rename lines 1 and 16. ![]() You can enter the root user’s name and password. Typically, the URL is port 10000, so it will appear like this: Once you’ve logged in with a valid account, you should be able to control many of your server services from the web interface. To access Webmin, you must have a web browser installed. To access Webmin from another computer on the network, replace the localhost with the IP address of the computer where the program is being accessed, or change the localhost to a different format. Open any web browser and enter followed by localhost and the port 10000 to obtain Webmin. ![]() If you use your local LAN to access your webmin page temporarily and unsecure, you can remove that SSL setting by editing: $ nano /etc/webmin/nf, and changing the ssl setting to 0 ssl=0. Is there a way to access webmin configuration page from local LAN or remotely? In order for your browser to transmit unencrypted information to a server, you must have Webmin configured with SSL. I can only access the webmin interface on one computer on the same network, and I am unable to do so regardless of the mode I’m using. I can start webmin if I use w3m (a command-line browser) on my host machine. If you can connect using the IP address but not the hostname, then there’s probably an issue with DNS resolution on your network. Finally, if you’re still having trouble connecting to the server, try connecting to it using its IP address instead of its hostname. If you have a firewall on your home network, make sure that it’s not blocking access to the server. Once you’ve verified that the server is up and running, the next thing to check is your firewall. If you can’t, then there’s probably something wrong with the server itself and you won’t be able to connect to it until you fix the problem. First, make sure that the server is actually running and that you can ping it from another computer on the network. If you’re trying to connect to a Linux server running Webmin from your home network, and you can’t seem to get it to work, there are a few things you can try.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |